The 38MM stainless steel conical burr cutter reduces the heat of grinding and gives the coffee powder a thicker flavor.

Use a small amount of coffee beans to test grind, do not brew, clean the coffee powder and then use it directly.

1.Hold the body and set the handle firmly, turn the scale adjustment dial clockwise to the end.

2.Hold the grinder and use the dial under that center burr.

3.Turn it clockwise, it fines the grind, turn it counter-clockwise, it coarsens the grind.

Use the brush to remove the coffee powder. After several uses, you can refer to the video instruction to disassemble the machine to remove the coffee powder and keep the coffee flavor.